VK1FR Frame - 685W x 1220H Welded

This is a full height frame and can be installed most vans and would usually be installed behind the front seats facing the rear or down the side of a van if only a small amount of shelving is required. If installing behind the front seats please be aware that this frame is full height and rear visibility for the driver will be affected. This frame suits any of the 630mm wide trays and can take a maximum of five trays depending on the tray size.

The upright post has 18 slots above the bottom bar and this is a welded frame (see individual tray descriptions for the numbers of slots required for each tray). The frame is constructed from 25.4mm square mild steel tube with a 1.6mm wall.

It is made from New Zealand steel which is fabricated and powder coated in New Zealand.

Installation: The upright square posts fit over the round upright post welded to the foot. The foot is tek screwed to the floor and the top brackets are fixed to the side of the van or nearest supporting structure. This is a welded frame for easier installation.

Installation instructions are available in the documents tab.

Dimensions: 1220mm high x 685mm wide