VK4FR Frame - 1000W x 895H Bolted with feet

This frame can be installed in an extra cab to double cab ute facing out a canopy window with a false floor or sliding draw, a station wagon or behind the seats in a van if only a small amount of storage is required. This frame is not suitable for installing down the side of a van as the top of the frame needs to be fixed to the side of the van and at 895mm high the top of this frame lines up with the window on most vans.

This frame suits any of the 950mm wide trays and can take a maximum of four trays depending on the tray size.

The upright post has 12 slots and this is a bolted frame (see individual tray descriptions for the numbers of slots required for each tray). The frame is constructed from 25.4mm square mild steel tube with a 1.6mm wall. It is made from New Zealand steel which is fabricated and powder coated in New Zealand.

Installation: This kit has no bottom bar. The feet tek screw to the floor and the square upright post goes over the round post on the foot. To ensure that the upright posts are spaced correctly insert at least one tray before fixing the feet. The top brackets needs to be fixed to the nearest supporting structure. This is a bolted frame and some assembly is required.

Installation instructions are available in the documents tab.

Dimensions: 895mm high x 1000mm wide x 310mm deep (the depth is the widest tray in the kit, in this case the tr3/950)