VK4FR Frame - 1000W x1220H Bolted

This is our most popular van shelving frame. It fits almost all vans on the market. For short wheel base L300’s and compact vans such as the VW Caddy or Holden Combo you can get the VK4R1120 kit which is the same configuration of trays and bins but with a slightly shorter frame to suit these vehicles.

This kit can be installed in nearly any position in a van, most commonly over the rear wheel arches, but it can it can be installed behind the front seats facing back or facing out a sliding door. This frame suits any of the 950mm wide trays and can take a maximum of five trays depending on the tray size. The upright post has 18 slots above the bottom bar.

This is a bolted frame and the bottom bar can be left out if you want to fit tray all the way down to the floor (see individual tray descriptions for the numbers of slots required for each tray).

The frame is constructed from 25.4mm square mild steel tube with a 1.6mm wall. It is made from New Zealand steel which is fabricated and powder coated in New Zealand.

Installation: The upright square posts fit over the round upright post welded to the foot. The foot is tek screwed to the floor and the top brackets are fixed to the side of the van or nearest supporting structure. This is a welded frame for easier faster installation.

Installation instructions are available in the documents tab.

Dimensions: 1220mm high x 1000mm wide